Page 1
Speed Crawler SC1 User Manual *product colors may vary PLEASE READ THIS MANUAL BEFORE USING. PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE...
Page 2
Powering it On How to turn on the SC1 Press here Hold down the Power button for 2 seconds to turn on the SC1 Speed Crawler...
SC1 Wrist Remote How to use Put it on Boot Put your thumb Long Press Power through the rubber Button to turn on. loop and strap it 3 LED’s blinking 3 times fast around your palm. indicate the remote is booted...
Page 4
SC1 Remote Control How to use Speaker Programming Mode Short Press Music Mode Long Press For 3 seconds Spray Move Move Forward/Back Left/Right Toggle Stealth/Truck Mode Vol- Vol+ Automatic Demo Left Forward Right Forward Forward & Forward & Left Right...
Battery Installation SC1 Battery Installation Use a small phillips head screwdriver to remove the battery cover. Replace the battery cover and screw back into place. *When removing the battery to charge, take care to unclasp the connector before pulling it off.
Page 6
The battery of the remote control watch does not need to be installed. Connect the charging cable to the charging port for charging. Fill Up The Smoke Chamber Open the stopper at the front of the car and pour water with the bottle included in the package.
Need help?
Do you have a question about the SC1 and is the answer not in the manual?
Questions and answers