Select how robot should compare data read from register, to a value configured below.
Bit offset
Fill bit offset for register, for robot to compare with bit value.
Bit value
Fill bit value for robot to compare register-bit with specified offset.
Byte value
Fill a byte value for robot to compare register data with, in hexadecimal. Range: 0 – FF.
3.6
Setup Submenu: System I/O
Chapter 3 – AMI BIOS Setup
0
Low
High
0
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
78