Table of Contents
Advertisement
3.4.10.3
Device #* Detecting Configuration – DIO
Options Summary
When interface item set to "DIO" will show below items
Device
Select that robot should or should not do action if condition met.
DIO pin number
Fill DIO pin number, DIO, DIO1, and so on. For COM express product: 0-3 -
GPI0-3\n4-7 - GPO0-3
Device
Select that robot should or should not do action if condition met.
In High/Low level
Select High/Low level of the DIO pin that robot should do action.
Chapter 3 – AMI BIOS Setup
is
Is not
DIO1
DIO*
is
Is not
Low
High
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
71
Advertisement
Table of Contents
