Electric Connection - Microsensor MPM4841 Operation Manual

maintenance, should be install shut-off valve between the connector and
the pipeline (see Fig. 2).
Caution：do not poke the pressure-leading hole with metal wire or
something hard; and do not press the diaphragm with finger or
something sharp to protect the diaphragm.
The recommended method is to see Fig.2.

4 Electric Connection

4.1 The transmitter is connected with the outside circuit
through plug or special cable.
The pin arrangements of socket are to see Fig. 3, and pin definitions are
as follows：
Pressure Transmitter
Valve
Pipe
Fig. 2
5