Landing Gear; Cleaning And Care; Windshield And Windows - Cessna 182T 2001 Pilot Operating Handbook

CESSNA
MODEL 182T

LANDING GEAR

Consult the following table for servicing information on the
landing gear.
COMPONENT
Nose Wheel (5.00-5, 6-Ply Rated Tire) 49.0 PSI
Main Wheel (6.00-6, 6-Ply Rated Tire) 42.0 PSI
Brakes
Nose Gear Shock Strut
* Keep strut filled with MIL-H-5606 hydraulic fluid per
filling instructions placard, and with no load on the
strut, inflate with air to 55.0-60.0 PSI. Do not over
inflate.

CLEANING AND CARE

WINDSHIELD AND WINDOWS

The plastic windshield and windows should be cleaned with an
aircraft windshield cleaner. Apply the cleaner sparingly with soft
cloths, and rub with moderate pressure until all dirt, oil scum and
bug stains are removed. Allow the cleaner to dry, then wipe it off
with soft flannel cloths.
NEVER USE
ACETONE,
LACQUER THINNER OR GLASS CLEANER TO CLEAN
THE PLASTIC. THESE MATERIALS WILL ATTACK THE
PLASTIC AND MAY CAUSE IT TO CRAZE.
If a windshield cleaner is not available, the plastic can be
cleaned with soft cloths moistened with Stoddard solvent to remove
oil and grease.
Apr 30/01
HANDLING, SERVICE & MAINTENANCE
GASOLINE,
FIRE EXTINGUISHER,
SERVICING CRITERIA
MIL-H-5606
MIL-H-5606;55.0-60.0 PSI *
BENZENE, ALCOHOL,
ANTI-ICE
SECTION 8
FLUID,
8-21