Detection Zones; Warranty Conditions; Technical Specifications; Waste Electrical And Electronic Equipment (Weee) Directive - Suzuki 990E0-54P56-010 Installers And Users Instructions

Detection zones are indicated as "F1" and "F2" and the detection zone closest to the obstacle "FC". The stage-by-stage sound
alert will vary according to the detection zone.
The STOP zone is the minimum distance detected between an obstacle and the sensor. In this case the warning tone is solid.
This product is guaranteed to be free from manufacturing defects for a period of 24 months from the purchase date validated by
the receipt or invoice (in compliance with Warranty Directive 1999/44/CE (L.D. N̊ 24 dated 02/02/2002); if these documents are
not available, warranty will start from the manufacturing date stated on and inside the product itself.
Warranty only covers the repairing or replacement of the parts showing manufacturing defects; direct labour, transport and any
other charges are excluded. The warranty does not apply in case of malfunctioning caused by: negligence, improper installation,
tampering and improper use of the system and its application is entirely at the manufacturer's discretion. In case of any warranty
request please contact your SUZUKI dealer.
The above is the only guarantee prescription and the buyer shall not have the right to ask for cancellation of the contract,
compensation for damage and/or price reduction.

9. WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) DIRECTIVE

The present device does not fall within the scope of Directive 2002/96/EC on Waste Electrical and Electronic Equipment
(WEEE) as specified in art. 2.1 of L.D. no. 151 of 25/07/2005.
6

6. DETECTION ZONES

ZONE
FC
F1
F2

7. WARRANTY CONDITIONS

8. TECHNICAL SPECIFICATIONS

Supply voltage
Current consumption - system ON
Operating temperature range
Ultrasonic frequency
SUZUKI GENUINE ACCESSORIES
DISTANCE
35 cm
60 cm
85 cm
9 => 30 Vdc
200mA max.
-30°C => +70°C
40 kHz
English_I-M 990E0-54P56-010 Rev00 03/09/2018