Table of Contents
Advertisement
EN̲5.ai 2010-6-30 8:57:44
EN̲5.ai 2010-6-30 8:57:44
INDOOR UNIT CONTROL PANEL / CLEANING UNIT
Open the front panel to operate. (How to open the front panel, page 8)
C
M
How to Attach the Nano Titanium Air Cleaning Mesh
Y
CM
Preparation
MY
CY
CMY
K
1
2
3
4
5
6
※
With the air cleaning mesh used, the air-conditioning capability will fall slightly.
Remove dust from the surface with a vacuum cleaner, and DO NOT clean it with water.
(We recommend you clean it once every 6 months and replace it once every 2 years.)
Dust Catcher
Collects the dust swept by
the cleaning unit. (At front
and top.) (Page 37)
Dust Box
Collects and keeps the dust
that has been cleaned.
(Page 34)
Stop the air conditioner, and disconnect
the power supply (or turn off the circuit breaker).
Open the front panel.
Pull out the air cleaning mesh box as illustrated to
remove it.
Insert the air cleaning mesh into the slot as illustrated.
Replace the air cleaning mesh box.
● "Make sure that it clicks into place."
● "If it dose not click into place, abnormal sounds
may be heard or the box may fall off."
Close the front panel.
Connect the power cord (or turn on the circuit breaker).
Stainless Mesh Filter (inside)
Collects particulates and dusts in the air. (Page 35)
Air Cleaning Mesh Box
Nano Titanium Air Cleaning Mesh
– 5 –
Cleaning Unit
Cleans the dust
caught by the micro
mesh stainless filter.
Air Cleaning Mesh Box
2
Jaw
3
4
Advertisement
Table of Contents
