Hitachi RAS-SX18HAK Instruction Manual page 27

EN̲27.ai 2010-7-7 15:21:44 EN̲27.ai 2010-7-7 15:21:44
C
M
Y
4
CM
MY
CY
•
CMY • 6:00 a.m. or the previous preset
time is displayed.
K
•
sequence of
and
How to cancel the preset timer
Press the
(All the preset timer will erase)
•
(OFF TIMER) /
cannot be set during the operation set by the
during the quick laundry or condensation control mode
operation.
• As the time settings are stored in memory in the remote controller, just press
the
P r e s s t h e ( O N
TIMER) button.
(ON TIMER) blinks.
display indicates the
(OFF TIMER)
(ON TIMER) function.
(CANCEL) button.
(ON TIMER), which are to be set using the clock function,
(PRESET) button in order to use the same settings next time.
5
Press the (TIMER)
button to set the time.
• Time can be set in increments
of 10 minutes.
• The time can be fast-forwarded
by continuously pressing the
button.
Time is incremented
Time is decremented
– 27 –
(AIR PURIFYING) buttons or
under (DEHUMIDIFY)
6
Press the (PRESET)
button.
• A short beep sounds and the
(ON TIMER) is set.
•
(ON TIMER) indication stops
blinking and lights up.
( T I M E R S E T ) w i l l b e
displayed.
• The
(TIMER) indicator on the
indoor unit lights up.
• To change the preset time
for (ON TIMER) , return to
4
procedure and press the
(ON TIMER) button.