Klarstein VIRTUOSA 5 Manual page 40

EN
40
Attach fixing clamps
Place the hob on a stable, flat surface (use the packaging). Do not apply force to
the controls protruding from the hob. After installation, fix the hob to the worktop
by attaching the four brackets with screws to the hob base (see illustration below).
Adjust the position of the brackets to the thickness of the worktop.
A
Screw
Glass
Clamp
ST 3.5*8 screw
Bottom case
Important instructions
• The hob must be installed by a qualified professional or technicians. Never
carry out the installation work yourself.
• The hob must not be fitted to refrigerators, dishwashers and tumble dryers.
• The hob must be installed in such a way as to ensure optimum heat radiation
to increase its reliability.
• The wall and the area above the work surface must be heat-resistant.
• To avoid damage, the intermediate layer and the adhesive must be heat-
resistant.
• Do not use a steam cleaner for cleaning.
B C
Clamp Hole
D
Hob base
Worktop/
Kitchen cabinet