Table of Contents
Advertisement
Available languages
Available languages
EN
48
Safety functions
•
Overheating protection: The temperature inside the appliance is monitored
by a temperature sensor. Should the appliance overheat, it switches off
automatically
•
Residual heat warning: If the appliance has been operated for a certain
period of time, residual heat remains after it is switched off. The symbol "H"
indicates this.
•
Automatic switch-off: This function is activated if you forget to switch off one
of the cooking zones. The default setting for this is as follows:
Power level
Operating time (hours)
Power management (model 10041117)
Power management in group A:
•
If both zones are set to power level 7 or higher, these zones switch on and off
alternately. This is controlled via software.
•
If only one zone is switched on or 2 zones are running at a power level lower
than 7, there is no limitation by the software.
Power management in group A:
•
In group B, all zones can run simultaneously without limitation.
1
2
3
4
8
8
8
4
5
6
7
8
4
4
2
2
9
2
Advertisement
Chapters
Table of Contents
