Table of Contents
Advertisement
1
1-63 Installing Fiery utilities
Modifying the configuration
Edit the configuration whenever there is any change to your Fiery X3e server or
network, such as a server name or IP address. If you change Fiery X3e Setup
information, do so before reconfiguring the connection.
T
O MODIFY THE CONFIGURATION
1. Start Command WorkStation.
The Login Server window appears.
2. Select the Fiery X3e server for which you want to modify the configuration,
and click Remove.
The Available Servers dialog box appears.
3. To add the modified Fiery X3e server, follows steps
"To configure the connection for Command WorkStation"
To modify the connection to the Fiery X3e, you must remove the server from the
Login Server list and follow the procedure for configuring the connection.
3
through
6
of the procedure,
on page 1-60.
Advertisement
Table of Contents
