Fiery KM-C2030 Quick Start Manual page 8

8 Quick Start Guide
3. To confirm this connection, turn on the copier/printer and the Fiery X3e and print a
Test Page from the Fiery X3e Control Panel.
To print a Test Page, press the Utility button on the Control Panel. In the Touch Panel,
press the Controller Detail button. Press the Menu button and select Print Pages.
Choose PS Test Page.
4. With both the copier/printer and the Fiery X3e turned off, connect the network cable
to the Fiery X3e.
The network should be installed and operational.
5. Turn on the copier/printer and the Fiery X3e.
Configuring the network server
If you require a network server, you must configure that server to provide client access
to the Fiery X3e as a color printer. To configure a network server in a Windows or
UNIX network environment, see the
NT/2000 (using TCP/IP) networks, the network servers must be configured for
printing to the Fiery X3e before you configure Fiery X3e network settings in Setup.
For more information, see the
Setting up the Fiery X3e from the Control Panel
Setup configures the Fiery X3e to communicate with other devices and manage print
jobs. You must perform Setup the first time you turn on the Fiery X3e after new system
software is loaded, or any time Server software is reinstalled. Initial Setup must be
performed at the Fiery X3e Control Panel.
Perform the following Setup options in the order listed:
• —specifies system options.
Server Setup
• —specifies all the active network systems that transmit print jobs to
Network Setup
the Fiery X3e.
• —specifies how print jobs and queues are managed.
Printer Setup
Configuration Guide. For Novell and Windows
Configuration Guide.