Page 5
Note: shelf size coordinates with the size of the frame. Apply glue onto the wood dowels (#D) and insert into the top right frame (#2). Apply glue onto the other ends and insert shelves (#5,6,7). I. Insert the barrel nut (#C), Slide the Phillip head screw (#A) through the hole on the side of the post piece until it bumps against the nut.
Page 6
Apply glue onto the wood dowels (#D) and insert into the bottom right frame (#4). Apply glue onto the other ends and insert shelves (#8,9). I. Insert the barrel nut (#C), Slide the Phillip head screw (#A) through the hole on the side of the post piece until it bumps against the nut.
Page 7
Insert a total of 20 wood plugs to fill the bolt holes. I. Determine exactly where you want to drill a hole and mark the spot(s). Be sure that you hold the drill perpendicular to the wall. You should drill a hole that is approximately the same size as the screw.
Need help?
Do you have a question about the Lyss CM-AC6214 and is the answer not in the manual?
Questions and answers