Use And Operation; Function Buttons - Honeywell CO301PC Series User Manual

USE & OPERATION
TOUCH SCREEN CONTROL PANEL
TIMER
NOTE: The Control Panel uses soft-touch control. Operate the air cooler by touching the buttons of the
Touch Screen Control Panel.

FUNCTION BUTTONS

POWER
Touch the button to turn the unit on. The cooler will start automatically at high speed. After a few
seconds the speed will switch to low. To turn the unit off, press the power button for 2 seconds or longer.
TIMER
Touch the TIMER button until the desired time duration setting is selected. When the set time
has passed, the unit will automatically turn off (unit remains in Standby mode until power cord is
unplugged from electrical socket). The TIMER function allows you to program the unit for up to 8 hours
of use.
SWING
Touch the SWING button until the SWING indicator light is illuminated on the control panel. The
louvers will begin to move left to right automatically.
Vertical Air Flow - You can manually adjust the louvers to change vertical air flow.
SPEED
Touch the SPEED button repeatedly to change the speed between High and Low. The display will show
the selected speed.
COOL
Touch the COOL button until it is illuminated on the display. This activates evaporative cooling.
The water pump will operate and you will feel the cooler air after the Honeycomb Cooling Media
is completely wet. When COOL is not illuminated, the unit switches to a fan only mode, without
evaporative cooling.
+
SAFETY LOCK
To avoid accidentally touching and changing the set air cooler settings, you can touch both the
POWER + COOL buttons at the same time to lock the control panel. Touch both POWER + COOL at the
same time again to unlock the control panel buttons.
SWING POWER
EN 2
SPEED COOL