Identification Label; Other Labels - MG HE Series Manual

5.2 Identification label

The identification label of the MG HE battery module is located at the top of the enclosure under the
lid.
Example identification label:
Figure 3 - Example identifications label
The identifications label shown in figure 3 contains written information about the product. The
explanation of the symbols used on the identification label is stated in table 8.
Table 8 - Identification lable logo explaination
Declaration of conformity with health, safety, and environmental protection standards
for products sold within the European Economic Area as per directive
Symbol indication the manual must be red before installation and use of the device.
Device is treated according the Waste Electrical and Electronic Equipment (WEEE)
Directive 2012/19/EU.
GS1 data matrix type barcode containing detailed product information.

Other labels

Figure 4 shows the additional labels on the battery module.
Figure 4 - Additional warning and informational labels
13
Innovation in energy storage
Version 2.3 – 21-9-2022
2014/35/EU.