Qualifications And Training; Non-Compliance Risks; Risk Assessment; Unacceptable Modes Of Operation - MG HE Series Manual

Qualifications and training

The personnel responsible for the assembly, operation, inspection, and maintenance of the battery
system must be appropriately qualified. The user company must do the following tasks:

Define the responsibilities and competency of all personnel working on the battery system.

Provide instruction and training.

Ensure that the contents of the operating and safety instructions have been fully understood
by the personnel.

Check the local safety rules and guidelines they have higher preference over the
manufacturers specification in case of regulatory conflicts.

Working on higher voltages requires specific training and certification.
Instructions and training can be carried out by MG Energy Systems B.V. by order of the user
company.

Non-compliance risks

Failure to comply with all safety precautions can result in the following conditions:

Death or serious injury due to electrical, mechanical, and chemical influences.

Environmental damage due to the leakage of dangerous materials.

Product damage.

Property damage.

Loss of all claims for damages.

Risk assessment

For every integration of the battery system it is mandatory to perform a risk assessment.
Goal of the risk assessment is to identify the hazards and determine the corresponding risks for the
particular application.
The following topics need to be addressed:

Fire hazards (fire from the batteries, fire from external source etc.)

Environmental hazards (moisture, water ingress, vibration, heat etc.)

Electrical hazards (short-circuit, cable dimensioning, cable routing etc.)

Installation and operational hazards (lifting, communication, power loss etc.)

Unacceptable modes of operation

The operational reliability of this product is only guaranteed when it is used as intended. The
operating limits on the identification tag and in the data sheet may not be exceeded under any
circumstances. If the identification tag is missing or worn, contact MG Energy Systems B.V. for
specific instructions.
WARNING:
The battery modules may only be used in combination with a master BMS.
(MG Master LV or MG Master HV)
4
Innovation in energy storage
Version 2.3 – 21-9-2022