Step 5 Connecting The Printer To The Computer; Printer Connections - Kyocera Mita Ecosys FS-1800 Installation Manual

STEP
5
Connecting the Printer to the Computer
There are various ways of connecting the printer to the computer, such as through the
parallel interface connector, serial interface connector, or through the option network
interface card. The FS-1800N/FS-3800N have a network interface card already
installed at the factory.

Printer Connections

Connector for option
sorter (See the option
sorter's user's man-
ual.)
Before performing this step, be sure to turn off both the printer and the com-
puter's power switches and unplug the printer's power plug from the power
outlet. Failure to do so may result in electrical shock.
A standard Centronics parallel interface connector (
interface connector (IOIOI) are located on the rear of the printer.
Serial Interface
Parallel Interface
Printer (Rear)
Network
) and serial (RS-232C)
Power Supply
Option Network
Interface Card
(3.3 V DC)
7
Go to next page