Using The Cassette - Kyocera FS-1714M Supplementary User’s Manual

Using the cassette

Keys are provided for the cassette lock on MICR printer.
Using the key
The key can open or close the cassette as shown in the figures below.
There are locks fitted to the cassettes with the optional paper feeders (PF-21L, PF-30L). The
method of opening or closing these cassette locks is the same as the printer. Also, the key
for the paper feeder and the printer are the same shape.
CLOSE
OPEN
[FS-1714M/FS-3718M]
Setting the Universal Cassette for FS-1714M/FS-3718M
By using the optional universal cassette in place of the paper cassette (PC-21L) that is supplied
with the printer, you can print on a wider variety of paper sizes.
Before installing the universal cassette, you must remove the retention bracket from the printer.
The following explains how to remove the retention bracket and install the universal cassette.
The universal cassette is not equipped with a lock.
For details regarding the use of the universal cassette, refer to chapter 1 in the FS-1750/
FS-3750 User's Manual.
To remove the retention bracket and set the cassette:
1.
Remove the paper cassette from the printer, and
place it on a flat, stable surface.
2.
Put a screw driver into the hole in the retention
bracket and remove the screw from the back of
the retention bracket.
Paper Cassette
Paper Cassette
OPEN
CLOSE
[FS-7028M]
Retention Bracket
Paper Cassette
Screw Driver
7