Optional Units - Mitsubishi Electric EcoMonitorLight EMU4-BD1-MB Manual

Optional Units
Common for Logging Unit and CC-Link Communication Unit
Connect optional units to the energy measuring unit.
①Peel off the blank label affixed to the left side
of the main unit of the energy measuring unit.
③Slide the coupling tab (green) on top of the optional
unit to lock the optional unit.
SD Memory Card for Logging Unit
Insert the SD memory card into the logging unit.
Hold the SD memory card straight when inserting into the SD memory card slot and press in until you hear a click sound.
Remove the SD memory card from the logging unit.
Press the SD memory card inward until you hear a click sound. The SD memory card automatically pops out.
Caution
②Insert the connector of the optional unit into the connector
of the energy measuring unit to closely attach the unit.
Blank Label
仮写真
CAUTION
仮写真
Do not remove the SD memory card until you have checked that the SD C. LED light has
gone out. Removing the SD memory card while this unit is communicating with the SD
memory card can damage the data in the SD memory card, and result in a malfunction of
this unit and the SD memory card.
Do not energize when connecting the energy
measuring unit and do not perform live-wire
installation. Doing so can result in electrical
shock, device malfunction, fire and similar
problems.
30