Table of Contents
Advertisement
www.keyestudio.com
Project 6: Adjust angles of servo
(1) Project Introduction
Servo motor is a position control rotary actuator. It mainly consists of a
housing, a circuit board, a core-less motor, a gear and a position sensor. Its
working principle is that the servo receives the signal sent by MCU or
receiver and produces a reference signal with a period of 20ms and width
of 1.5ms, then compares the acquired DC bias voltage to the voltage of the
potentiometer and obtain the voltage difference output.
When the motor speed is constant, the potentiometer is driven to rotate
through the cascade reduction gear, which leads that the voltage
difference is 0, and the motor stops rotating. Generally, the angle range of
servo rotation is 0° --180°.
(2) Working Principle of Servo：
282
Hide quick links:
Advertisement
Table of Contents
