Write Code And Program - Keyestudio KS4028 Manual

www.keyestudio.com

5.1 Write code and program

This chapter describes how to write program and load the program to the
Micro: Bit main board V2.
You are recommended to browse the official website of Micro:bit for more
details, and the link is attached below:
https://microbit.org/guide/quick/
Step 1: connect the Micro: Bit main board with your computer
Firstly, link the Micro: Bit main board with your computer via the USB cable.
Macs, PCs, Chromebooks and Linux （including Raspberry Pi） systems are all
compatible with the Micro: Bit main board.
Note that if you are about to pair the board with your phone or tablet,
please refer to this link:
https:/microbit.org/get-started/user-guide/mobile/
17