www.keyestudio.com
Project 5:Induction Lamp
(1)Project Introduction
In the previous project experiment, we have mastered the working
principle of the PIR motion sensor and its control method. In this project,
we combine it with a yellow LED to control LED's brightness
(2)Test Code:
The route to get test
File Type
Hex file
KS4027
Tutorial/Makecode Code/Expansion
Projects/Project 5:Induction Light
You can also drag blocks to form code.
Command blocks can be found on the right as shown below:
codes(How to
load?)
Route
folder/Makecode
File Name
Project 5:Induction
Light.hex
278