Project 7: Accelerometer - Keyestudio KS4028 Manual

www.keyestudio.com

Project 7: Accelerometer

(1) Project Introduction
The Micro: Bit main board V2 has a built-in LSM303AGR gravity
acceleration sensor, also known as accelerometer, with a resolution of
8/10/12 bits. The code section sets the range to 1g, 2g, 4g, and 8g.
We often use accelerometer to detect the status of machines.
In this project, we will introduce how to measure the position of the board
with the accelerometer. And then have a look at the original three-axis data
output by the accelerometer.
(2) Components Needed:
Micro:bit main board *1 USB cable*1
156