Keyestudio KS4028 Manual page 206

www.keyestudio.com
Attach the Micro:bit main board to your computer via the USB cable.
(4)Game Rule1
There are two bullets (marked as G1 and G2)falling from the LED dot matrix
and a role G on the bottom of the matrix. Button A and B can be used to
control the movement of the role to dodge bullets. It moves to the right
when A is pressed and to the left when B is pressed. The game is over when
G is hit and the game can start over by pressing A and B together.
(5)Test Code 1:
The route to get test
File
Type
Hex file KS4027
Tutorial/Makecode
Code/Project 13：Dodge Bullets
codes（How to load?）
Route
folder/Makecode
Code/Project
File Name
Project 13：Code-1.hex
206