Table of Contents
Advertisement
Operation
October 2015
5.1.8
Optical Gates screen
The Optical Gates screen allows the user to see the output gate position and the bin
full time for the control system.
Figure 5-8
Figure 5-8 Optical Gates page
A
B
C
D
A.
Input Gate Position: displays the position in mm of the input gate of the system. This is
always 0.
B.
Output Gate Position: displays the position in mm of the output gate of the system relative
to the input gate.
C.
Bin Full Time: is the time in seconds that the reject verification gate must be blocked for the
bin full error to be displayed.
D.
Last Output: monitors the canister position as it exits the leak detection system.
E.
Position Summary Chart: summarizes any deviations in the expected can position when
exiting the leak detection system.
F.
Position Summary Chart Reset: clears the Position summary chart.
Operation
QCL-MAN-CT2211-Aerosol-Leak-Detection-System-Rev F
below shows the Optical Gates screen:
User Manual
E
F
22
Advertisement
Table of Contents
