Table of Contents
Advertisement
Keep all packing materials until the unit has been inspected.
z
Inspect the product to ensure there is no shipping damage. If any damage is detected
z
contact the dealer or retailer you bought the product from to report the damage.
Fisher & Paykel is not responsible for shipping damage.
z
1
2
3
UNPACK PRODUCT
Cut straps, lift the top cap off and cut
down the side of the carton to remove.
Dispose of packaging responsibly.
Remove all pre packaged parts and set
aside. Do not discard.
Push the grille flap to open and unscrew
the two screws behind the flap and five
on the grille. Set screws aside. Open the
door and pull the grille outwards from
the product.
4
5
6
7
Using a crosshead screwdriver, unscrew
the transit brackets from one side of the
product and set aside.
Check levelling feet have been raised,
tilt product and insert handtruck.
Restrain product to handtruck.
We recommend using the corner
posts to protect the product when
using restraints.
Remove the two remaining
transit brackets.
Tilt product onto handtruck and
remove palette. Move product to the
installation location.
Remove and discard corner posts.
17
Advertisement
Table of Contents
