Table of Contents
Advertisement
1. Note
Refer to the service manual for Model No. SA-EH590EG, SA-EH590EP (Order No. AD0302008C8)
for information on Accessories and Packaging.
2. Location of Controls
3. Operation Checks and Component Replacement /
Procedures
- This section describes procedures for checking the operation of
the major printed circuit boards and replacing the main
components.
- For reassembly after operation checks or replacement, reverse the
respective procedures. Special reassembly procedures are
described only when required.
3.1. Checking for the main P.C.B.
- Check the main P.C.B. as shown above.
3.2. Checking for the operation P.C.B.
- Follow the (Step 1) - (Step 3) of item 3.1.
2
Advertisement
Table of Contents
