Kurzweil K2500 Reference Manual page 79

inverting the signal. The LsrCntour parameter adds only the Laser Delay portion of the effect, including itÕs own
regeneration. For the most intense laser-ness, keep Dly Fdbk at 0% while LsrCntour is enabled.
Dly FBImag, Dly Xcouple, Dly HFDamp, and Dly LFDamp are just like those found in other algorithms. Not all
Laser Delays in combination algorithms will have all four of these parameters.
L Input
Dly Time L 0 to 6 bts
Dly Fdbk L -100 to 100%
Dly HFDamp 0 to 32 bts
Dly LFDamp 0.10 to 6.00 x
LsrCntourL 0 to 100%
LsrSpace L 0 to 100 samp
Dly Time L, Dly Time R
Dly Fdbk L, Dly Fdbk R The amount of the output of the effect that is fed back to the input.
Dly HFDamp
Dly LFDamp
Dly FBImag
Dly Xcple
From Right
Channel
Delay Feedback
To Right
Channel
Laser Delay (left channel)
Dly Time R
Dly Fdbk R
Dly FBImag
Dly Xcple
LsrCntourR
LsrSpace R
The delay lengths of each channel in beats. The duration of a beat is speciÞed with the
Tempo parameter. The delay length in seconds is calculated as beats/tempo * 60
(sec/min).
Controls the cutoff frequency of a 1 pole (6dB/oct slope) lowpass Þlter in the feedback
path. The Þlter is heard when either Dly Fdbk or LsrCntour is used.
Controls the cutoff frequency of a 1 pole (6dB/oct slope) hipass Þlter in the feedback
path. The Þlter is heard when either Dly Fdbk or LsrCntour is used.
This parameter controls the amount of image shifting during each feedback
regeneration, and is heard only when Dly Fdbk is used. Small positive values shift the
image to the right, while small negative values shift to the left. Larger values tend to
shift the image so far that the image gets scrambled, and in some cases create ambience.
This parameter controls the amount of signal that is swapped between the left and right
Configurable Combination Algorithms [Ò<>Ó]
Delay
XCouple
To Right
Channel
Imaging
From Right
Channel
0 to 6 bts
-100 to 100%
-100 to 100%
0 to 100%
0 to 100%
0 to 100 samp
Laser
L Output
Element
Algorithm Reference-79