Kurzweil K2500 Reference Manual page 3

L Input
R Input
Dual MiniVerb has a full MiniVerb, including Wet/Dry, Pre Delay and Out Gain controls, dedicated to each of the
left and right channels. The two blocks in the diagram above labeled ÒMiniVerbÓ contain a complete copy of the
MiniVerb on the previous page. Dual MiniVerb gives you independent reverbs on both channels which has obvious
benefits for mono material. With stereo material, any panning or image placement can be maintained, even in the
reverb tails. This is pretty unusual behavior for a reverb, since even real halls will rapidly delocalize acoustic images
in the reverberance. Since maintaining image placement in the reverberation is so unusual, you will have to
carefully consider whether it is appropriate for your particular situation. To use Dual MiniVerb to maintain stereo
signals in this manner, set the reverb parameters for both channels to the same values. The Dry Pan and Wet Bal
parameters should be fully left (-100%) for the left MiniVerb and fully right (100%) for the right MiniVerb.
Parameters (MiniVerb):
PAGE 1
Wet/Dry 0 to 100%wet
Rvrb Time 0.5 to 30.0 s, Inf
L Pre Dly 0 to 620 ms
PAGE 2
Room Type Hall1
Pan
Dry
MiniVerb Wet
MiniVerb Wet
Dry
Pan
Simplified block diagram of Dual MiniVerb
Out Gain
HF Damping
R Pre Dly
Diff Scale
Size Scale
Density
FXAlg #1: MiniVerb ¥ FXAlg #2: Dual MiniVerb
Balance
Balance
Off, -79.0 to 24.0 dB
16 to 25088 Hz
0 to 620 ms
0.00 to 2.00x
0.00 to 4.00x
0.00 to 4.00x
L Output
R Output
Algorithm Reference-3