Kurzweil K2500 Reference Manual page 77

Left
Contro l Set 1
LFOL
Fig. 3 Ñ LFO control in Link1Tap mode
In addition to the LFO delay taps, the flange offers a static delay tap for creating through-zero flange effects. The
maximum delay time for this tap is 230ms and is controlled by the Fl StatDly parameter. Its feedback amount is
controlled by the Fl StatFB. Separate mix levels for the LFO taps and the static tap are then controlled by the Fl
StatLvl and Fl LFO Lvl controls. The feedback and level controls can polarity-invert each signal by setting them to
negative values.
Chorus:
Ch LFO cfg Dual1Tap...
Ch Rate 1 0.01 to 10.00 Hz
Ch Depth 1 0.0 to 100 ct
Ch Delay 1 0 to 1000 ms
Ch Fdbk L -100 to 100%
Ch Xcouple 0 to 100%
Flange (PAGE 1):
Fl LFO cfg Dual1Tap...
Fl Rate 1 0.01 to 10.00 Hz
Fl Xcurs 1 0 to 230 ms
Fl Delay 1 0 to 1000 ms
Fl Fdbk 1 -100 to 100%
Fl Phase 1 0 to 360 deg
Right
LFO R
Ch LRPhase
Ch Rate 2
Ch Depth 2
Ch Delay 2
Ch Fdbk R
Ch HF Damp
Fl LRPhase
Fl Rate 2
Fl Xcurs 2
Fl Delay 2
Fl Fdbk 2
Fl Phase 2
Configurable Combination Algorithms [Ò<>Ó]
Left
Control Set 1
LFO1L
Control Set 2
LFO2R
Fig. 4 Ñ LFO control in Link2Tap mode
0 to 360 deg
0.01 to 10.00 Hz
0.0 to 100 ct
0 to 1000 ms
-100 to 100%
16 to 25088 Hz
0 to 360 deg
0.01 to 10.00 Hz
0 to 230 ms
0 to 1000 ms
-100 to 100%
0 to 360 deg
Algorithm Reference-77
Right
LFO1R
LFO2L