Advertisement
Available languages
Available languages
EN
Before using this appliance, read this operator's manual and follow all its safety rules and operating instructions.
Safety instructions
1. Study, understand, and follow all instructions before operating this device.
2. Do not exceed rated capacity.
3. Use only on hard, levelled surfaces, with less than 3 degrees of slope.
4. Center load on saddle.
5. Use as a matched pair only.
6. Stands are not to be used to simultaneously support both ends of a vehicle.
7. No alterations shall be made to this product.
8. Support only on areas of the vehicle as specified by the vehicle manufacturer.
9. Only attachments and/or adapters supplied by the manufacturer shall be used.
10. Use wheel chocks or other blocking device on opposing wheels before using jack stands.
11. Do not use jack stands for any use other than the manufacturer specified usage.
12. Do not use if damaged in anyway.
13. Never use jack stands on a lawn mower or lawn tractor.
14. Do not move or dolly the vehicle while on support stands
15. Do not rock the vehicle while working on or around equipment.
16. The following are not recommended for supporting on this equipment foundations, homes, mobile homes, trailers, RV's, Campers, nor Fifth wheels, etc.
17. Failure to heed these markings may result in personal injury and/or property damage.
Technical Data
Model:
BWR5122
Capacity (Ton):
2
Min. Height (mm)
278
Max. Height (mm)
423
N.W (Kg)
5
Operating Instructions
● Put the jack stands on hard level ground.
● Adjust height by pulling up on ratchet.
● Place load on the center of saddle for safety it is strongly recommended that lifting means not be removed while jack stands are supporting the vehicle.
● Secure ratchet by turning stopper to hold load.
● Make sure stopper has been securely inserted.
● Release stopper and let ratchet glide down to the lowest position when storing the jack stand.
● Inspect before each use. Do not use if bent broken or cracked component are noted. Prevent corrosion. Clean as needed and wipe with an Oily cloth and
keep in dry area when not in use.
Some models may be equipped with screws rather than a metal tab.
2
* The manufacturer reserves the right to make minor changes to product design and technical specifications
without prior notice unless these changes significantly affect the performance and safety of the products. The
parts described / illustrated in the pages of the manual that you hold in your hands may also concern other
BWR5123
models of the manufacturer's product line with similar features and may not be included in the product you
just acquired.
6
* Please note that our equipment has not been designed for use in commercial, trade or industrial applica-
tions. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for
395
equivalent purposes.
613
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or
replacement work, including maintenance and special adjustments, must only be carried out by technicians
12.9
of the authorized service department of the manufacturer.
Picture 1
WWW.BORMANNTOOLS.COM
Picture 2
Advertisement
