Replacing The Battery - tibelec 0900001 Instructions Manual

Replacing the battery

The consumer is obliged by law to recycle all used batteries and accumula-
tors. It is forbidden to throw them in the ordinary bin! Refer to the environ-
mental protection details.
Model n°EM5893
- Auto power off : meter automatically shuts down after approx. 15 minutes of inactivity
- Rating temperature : 0°C~40°C
- Operating temperature : -10°C~ 50°C
- Size and weight : 54x91x190mm / 435gr (with battery)
- Safety standard : 600V CAT III.
Protected by
standard fuse
Certified in accordance
with European stan-
dards
Risks resulting from
hazardous voltages
16
:
When the symbol appears
new one :
1. Set the function switch to Off
2. Loosen the screw on the back of the tester
3. Open and replace the battery in the corresponding area with
a battery of the same type (6F22 9V)
4. Tighten again.
, replace the battery with a
+ -
Class II equipment
without ground
connection
Do not dispose of appliances
bearing this symbol with
domestic waste. Use a suitable
collection point.