Print Message Center Data Block (Table 8-2) - Toshiba Perfecptione Installation And Maintenance Manual

PROGRAMMING PROCEDURES
SECTION 200-255-308
JANUARY 1993
2. Print Message Center Data Block (Table 8-2)
2.01 To use the Print Message Center Data Block
(PMCD Program):
l
Perform the Authorization Procedure (Level 1 or
2).
Enter: PMCD (in response to the OK prompt).
l
When the REQ prompt is received after the
program is loaded:
Enter: PRT.
l
The Message Center Data Block will output data
in the same format as it was input in the
DMCD
Program.
!r-
.,: I
Le.
TABLE 8-2
Procedure - Print Message Center Data Block
Authorization Procedure must be completed. If an OK response is received, proceed as follows:
ITEM
PROMPT
OK
PMCD
- DISK LOADING -
USER ENTRY
NOTE
=x2
PRT
1
I
NOTES:
response possible is: PRT = Outputs Message Center Data Block.
= Ignore line entered.
= Backspace.
= Stop printing and return to REQ.
= Exit program.
8-4