U-Line U-3018CLR User Manual & Service Manual page 56

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Relay Toggle
Up
Down
Relay toggle is used to manually switch the state of each
relay to test for proper operation. In addition to the AC
relays, DC switches may also be toggled. Relay toggle can
also be used to force the unit into a particular state.
ID Description
Mull Not Used
Pump Circulation Pump
Water Water Valve
Harvest Harvest
Cond Condenser Fan
Comp Compressor
Fan 1 Not Used
Fan 2 Not Used
Fan 3 Not Used
Light 1 Zone Lighting
N/A N/A
To access Relay Toggle
4. Press to select "Relay Toggle".
5. Press .
6. Press and to scroll through each relay and DC
output.
7. Press to toggle.
To exit the Relay Toggle menu press
to Menu" and press to confirm.
Select
RETURN TO MENU
RELAY TOGGLE
MULL OFF
COND OFF
Voltage
AC
AC
AC
AC
AC
AC
N/A
N/A
N/A
DC
N/A
to select "Return
Input Status
Up
Down
Input status displays the current state of each available
input.
ID Description
Pump Circulation Pump
To access Input Status
1. Press to select "Input Status".
2. Press .
3. Press and to scroll through available
information.
To exit the Input Status menu press
to Menu" and press to confirm outputs.
Outputs
Up
CONDENSER FAN=0%
Down
Outputs is used to monitor the state of DC outputs.
ID Description
Light Zone Lighting
u-line.com
Select
RETURN TO MENU
INPUT STATUS
DOOR OPEN
IN2 OPEN
State
Open - Closed
to select "Return
Select
RETURN TO MENU
OUTPUTS
EVAP FAN=0%
Value
Off - Low - Med - High
Control Operation - Service 4