Related Manuals for Srne IU Series
Summary of Contents for Srne IU Series
- Page 1 IU Series Pure Sine Wave Inverter (High Frequency) User Manual Manual version: V1.01 Subject to change without notice Code: 107058...
- Page 2 Please keep this manual for future reference 3.1 RS485 communication ----------------------------------------------------------------------------------------- This manual contains all safety, installation and operating instructions for the IU Series pure sine 3.2 USB interface ----------------------------------------------------------------------------------------------------- wave inverter (high frequency) (hereinafter referred to as "the Inverter"). Please read all instructions and precautions in the manual carefully before installation and use.
-
Page 3: Product Overview
11 12 13 long-time and full-power output. And comprehensive electronic protections keep the entire system safer and more stable; IU series is applicable to various off-grid systems that need to convert DC into AC, such Name as RV power supply system, on-board system, monitoring system, emergency lighting system, household Name power supply system, small-scale on-site power supply and occasions with high requirements for power quality. -
Page 4: Specification
2. Specification 3. Description of interface function 3.1 RS485 communication Product model IU12-2KW IU24-3KW Remarks (1) Default baud rate: 9,600 bps, check bit: none, data bit: 8 bit, stop bit: 1 bit Rated output power W 2000W 3000W (2) Interface type: RJ45, communication power supply output specification: 5VDC/200mA Rated output power VA 2000VA 3000VA... -
Page 5: Operating Mode Switch
3.4 Operating mode switch 3.6 External switch contact interface 2P switch interface: Inverter can work when the interface is short-circuited; Inverter fails to work With a 3rd position boat switch, the inverter has 3 operating modes including OFF, ON, and ECO when when the interface is open. -
Page 6: Installation Instructions
4. Installation instructions 4.3 Installation and wiring Installation steps: 4.1 Installation precautions Step 1: Please read the user manual carefully. Step 2: Determine the installation position and the space for heat dissipation. Please read this manual carefully before installation to be familiar with the installation steps. Determine the installation position (wall-mounted or horizontal installation method can be adopted): when Be careful when installing battery. -
Page 7: Protection Function
2) The inverter is equipped with a standard American-Standard terminal, as shown in the drawing below, 3.2 Positive/Negative wires of storage battery with a maximum current capacity of 20A. BAT+: Positive BAT-: Negative Step 4: Start the inverter 4.1 Close the circuit breaker at the inverter's DC input terminal or the fuse at the battery; There is no reverse connection protection for the input, check if the Positive and Negative are 4.2 Short circuit the inverter's external switch contact interface (short-circuited for factory);... - Page 8 5.4 Output of short-circuit protection 7. System maintenance When the AC output L/N is short-circuited, the inverter automatically turns off the AC output, and fault indicator and buzzer prompt. In order to maintain the best long-term performance, it is recommended to conduct following checks twice a year. The AC output has three automatic recoveries for inverter's short-circuit protection (the first time delay Make sure that the airflow around the inverter is smooth and remove any dirt or debris from the heat sink.
Need help?
Do you have a question about the IU Series and is the answer not in the manual?
Questions and answers