Schaller Messtechnik humimeter GE1 User Manual page 2

Evaluation scale of measuring value
For some calibration curves, the measuring value shown on the display is
evaluated in 4 different increments. This evaluation scale bases on the
experience of Schaller GmbH. As the increments can differ according to the
craft resp. business, a plausibility check is recommended.
At increasing moisture, the 4 increments are:
dry -> optimum -> moist -> wet
The evaluation scale differs depending on the material!
Design of GE1 basic device (article no. 13400)
calibration curve
temperature
measuring value
Power button
evaluation
batteries slot
(flipside)
selection of
calibration curve
page 2 Version 1.0_en