Table of Contents
Advertisement
♦ Registration number: "e.g. WOB-HH 1234"
♦ Emission key No. "field 14.1 (code for field 14)"
♦ Vehicle manufacturer: "Field 2", "Field 2.1 (code for field 2)"
♦ Vehicle identification number "field E"
♦ Type and version "Field D2 (type only)", "Field 2.2 (code for
field D.2)"
Specified data input for EET
There are different ways to enter the specified data:
♦ 1. By manual input
♦ 2. By bar code input from EET data sheet
♦ 3. Through ELSA web service
Note
If there is no
to deactivate the engine speed limiter, the
♦
ESP
rev limit can be measured using the engine speed limited by
the control unit. To do this, all the EET specifications must be
entered manually.
To use the ELSA web service, the exhaust gas testing station
♦
L which is used for the exhaust emissions test must be inte‐
grated in the workshop network.
The ELSA web service automatically transmits the data for the
♦
specific vehicle via the network to the respective mask.
Manual specified data input for EET:
Note
All test conditions and data required for exhaust emissions test
♦
can be found in the ⇒ Data sheets for exhaust emissions test
for respective engine.
If the engine speed limiter cannot be deactivated, enter the
♦
value 2500 ± 200 rpm in the box for rev limit and 2500 in the
box for engine speed for conditioning.
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
Maintenance - Edition 08.2017
5. Exhaust emissions test
131
Hide quick links:
Advertisement
Table of Contents
