Table of Contents
Advertisement
Question: Why do not some parallel port devices work
with the SC-215?
Answer:
The SC-215 does support pass-through
printing, but the pass-through printing may not
work if you connect the parallel port with
devices other than printer. Therefore, if you
would like to connect some parallel port
devices other than printer, please do not
connect them to the same parallel port that the
SC-215 currently uses. It is suggested that
you use other parallel ports to connect these
devices. For instance, you can connect the
SC-215 to LPT1, and connect other parallel
port devices to LPT2. Or you can add a data
switch to avoid the problem.
Question: Why does not your document print?
Answer:
Verify that there is enough memory installed in
the printer.
Make sure that the power cable has been
firmly connected and that the power LED on
the front of the SC-215 is on.
Question: Why is not the print quality acceptable?
Answer:
Verify that there is enough memory installed in
the printer.
9-2
-
Advertisement
Table of Contents
