Uplink Messages - Radio Bridge RBS301-WAT-US User Manual

Wireless water leak sensor
Hide thumbs Also See for RBS301-WAT-US:
Table of Contents

Advertisement

6.2. Uplink Messages

The uplink message (sensor to web application) specific to the sensor is defined in following
table. The common uplink messages are not included in this section (see common messages
document).
Byte
0
1
The water event bit definitions are shown in the following table.
Bits
7:1
1
0
The 8-bit event for the liquid sensor contains a relative measurement of the resistance
between the probes with a scale of 0-255. Different liquids will have a different resistance
through the material (water vs fuel for example), so this measurement can be used to set the
threshold properly as defined by the configuration message in the Downlink section
C
© 2019, R
OPYRIGHT
ADIO
Table 5 Uplink Message 0x08: Water or Liquid Event
Description
Water event (see table Water Event Bit Definitions)
Relative measurement of the resistance between probes
(scale of 0-255)
Table 6 Water Event Bit Definitions
Description
Unused
Water or liquid not present
Water or liquid present
B
I
.
RIDGE
NC
W
IRELESS
W
W
L
S
IRELESS
ATER
EAK
ENSOR
W
L
S
ATER
EAK
ENSOR
P
7
12
AGE
OF

Advertisement

Table of Contents
loading

Table of Contents