Common Messages; Uplink Messages - Radio Bridge RBS101-AL-RCZ1 User Manual

6.1. Common Messages

6.2. Uplink Messages

C © 2019, R
OPYRIGHT
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
There are common messages across all wireless sensors that are defined in the document
"Common Sensor Messages" which is available on the Radio Bridge website.
Refer to the document "Common Sensor Messages" for definitions of all
common messages. Common messages are not defined in this document.
Common messages include basic error messages, tamper, supervisory, and downlink ack. It
is important to refer to that document prior to decoding the messages defined in this
section.
The uplink message (sensor to web application) specific to the RBS101-AL is defined in
following table. The common uplink messages are not included in this section (see common
messages document).
Table 5 Uplink Message 0x0B: Ambient Light Event
Byte Description
0 Ambient Light Event Payload (see Ambient Light Event
Payload Definitions)
1 Current ambient light measurement (scale 0-255)
The ambient light event is defined in the following table.
Table 6 Ambient Light Event Payload Definitions
Event Payload Description
0x00 Periodic report
B I .
ADIO RIDGE NC
W
W A L S
IRELESS MBIENT IGHT ENSOR
A L S
IRELESS MBIENT IGHT ENSOR
P 6
AGE OF
13