VERVIEW 2.1. Sensor Overview The wireless sensors designed and manufactured by Radio Bridge provide full sensor to cloud solutions for Internet of Things (IoT) applications. The water sensor uses a water/liquid sensor probe to detect the presence of water or other liquids. When the presence of water or another liquid is detected, an alert is sent over the wireless network.
6.1. Common Messages There are common messages across all wireless sensors that are defined in the document “Common Sensor Messages” which is available on the Radio Bridge website. Refer to the document “Common Sensor Messages” for definitions of all common messages. Common messages are not defined in this document.
IRELESS ATER ENSOR 6.2. Uplink Messages The uplink message (sensor to web application) specific to the sensor is defined in following table. The common uplink messages are not included in this section (see common messages document). Table 5 Uplink Message 0x08: Water or Liquid Event Byte Description Water event (see table Water Event Bit Definitions)
IRELESS ATER ENSOR 6.3. Downlink Messages The downlink message (web application to sensor) specific to the sensor configuration is defined in following table. The common downlink messages are not included in this section (see common messages document). Table 7 Downlink Configuration Message 0x08 Byte Description Disable Events (see table Disable Events Bit Definitions) Threshold of relative resistance between probes (scale 0-255)
UPPORT Radio Bridge offers free technical support at: https://support.radiobridge.com Radio Bridge also offers technical support plans and service packages to help our customers get the most out of their Radio Bridge products. ISCLAIMERS Information in this document is subject to change without notice and does not represent a commitment on the part of Radio Bridge.