VERVIEW 2.1. Sensor Overview The wireless sensors designed and manufactured by Radio Bridge provide full sensor to cloud solutions for Internet of Things (IoT) applications. The water leak sensor uses a water/liquid sensor probe to detect the presence of water or other liquids. When the presence of water or another liquid is detected, an alert is sent over the wireless network.
Font / Icon Meaning Important notes Warnings and cautions 2.4. Part Numbers Table 3 Part Numbers Part Number Rating Wireless Region Water Probes RBS301-WAT-US Indoor LoRaWAN North America, South America RBS301-WAT-EU Indoor LoRaWAN Europe RBS301-WAT-AU Indoor LoRaWAN Australia, South America...
IRELESS ATER ENSOR RBS301-WR1M-US Indoor LoRa North America, South America RBS301-WR1M-EU Indoor LoRa Europe RBS301-WR1M-AU Indoor LoRa Australia, South America RBS306-WR1M-US Outdoor/Industrial LoRa North America, South America RBS306-WR1M-EU Outdoor/Industrial LoRa Europe Water Ropes – 10 meter length RBS301-WR10M-US Indoor LoRa North America, South America RBS301-WR10M-EU Indoor...
If the standard Radio Bridge console (console.radiobridge.com) is not used, refer to this section to decode the sensor data and configure the sensor through downlink messages. 6.1. Common Messages There are common messages across all wireless sensors that are defined in the document “Common Sensor Messages”...
IRELESS ATER ENSOR 6.2. Uplink Messages The uplink message (sensor to web application) specific to the sensor is defined in following table. The common uplink messages are not included in this section (see common messages document). Table 5 Uplink Message 0x08: Water or Liquid Event Byte Description Water event (see table Water Event Bit Definitions)
IRELESS ATER ENSOR 6.3. Downlink Messages The downlink message (web application to sensor) specific to the sensor configuration is defined in following table. The common downlink messages are not included in this section (see common messages document). Table 7 Downlink Configuration Message 0x08 Byte Description Disable Events (see table Disable Events Bit Definitions) Threshold of relative resistance between probes (scale 0-255)
(2) this device must accept any interference received, including interference that may cause undesired operation. Per FCC 15.21, Changes or modifications not expressly approved by Radio Bridge could void authority to operate the devices. Sigfox RBS101, RBS104, and RBS105 sensors FCC ID: 2APNUSFM10R2...
UPPORT Radio Bridge offers free technical support at: https://support.radiobridge.com Radio Bridge also offers technical support plans and service packages to help our customers get the most out of their Radio Bridge products. ISCLAIMERS Information in this document is subject to change without notice and does not represent a commitment on the part of Radio Bridge.