Table of Contents
Advertisement
3.0 - Confi guration & Assembly
Upon initial receipt of the DBF-43A system, inspect the packaging for any evidence that the product may have been
damaged in shipment. While unpacking the product, inspect all of the components for damage. If damage to any of
the components is discovered, DO NOT USE THE PRODUCT! Alert the shipping carrier immediately of the damage
to the shipment.
3
Replacement Parts Identifi cation Table
(Refer to Figure 3.0, 3.1a, and 3.1b)
Item
Part
Number
Number
1
120605-001 Pin - Hitch, 1/2" Dia. X 4-1/4" Long
2
500408-001 Pin & Lanyard (2X total per system)
3
500227-001 Leveling Jack Assembly (4X total per system)
4
500238-001 Decal – Attention
5
500234-001 Decal – MAF Warning
6
103299-001 Decal – Service & Parts Information
7
501046-001 Decal – Warning - Maximum 18" Offset
Verify that all parts are present before product use.
The #DBF-43A is shipped fully assembled.
1. Ensure that the product has been shipped with all the necessary components and is in working order
**Refer to parts list above for common replacement parts. If replacement parts are required, they can be ordered from
the T.A. Pelsue Company at 800-525-8460.
Page 8
2
FRONT FOLDING LEGS:
Description
#501034-001
3
Figure 3.0: DBF-43A
Parts Diagram
#501071-001 - Product Manual: #DBF-43A Davit Base - Folding - Revision 00 - Date: 02-24-2009
3
CENTER SUPERSTRUCTURE:
#501033-001
2
3
1
Advertisement
Table of Contents
