Safety; Warning Statement - Pelsue DBF-43A Product Manual

Davit base - folding
Table of Contents

Advertisement

4.0 - Safety

The following section will address the safety precautions which must be adhered to when working with Pelsue confi ned
Space Safety equipment such as the DBF-43A Folding Davit Base. Any user must familiarize themselves with the infor-
mation in this section before utilizing the equipment.
SIGNAL WORDS:
Note the use of the signal words DANGER, WARNING and CAUTION with the safety messages. The appropriate signal
word for each message has been selected using the following guidelines:
Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. This
DANGER-
signal word is to be limited to the most extreme situations or for hidden or unseen hazards.
WARNING- Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury and
includes obvious and hidden hazards. It may also be used to alert against unsafe practices.
CAUTION-
Indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It
may also be used to alert against unsafe practices.
You are responsible for the safe operation, maintenance and inspection of your Pelsue DBF-43A Folding Davit Base. You
must ensure that anyone who will operate, maintain, inspect or work around the equipment be familiar with the operating
and maintenance procedures and related safety information contained in this manual. This manual will take you step-
by-step through the workings and capabilities of the DBF-43A Folding Davit Base and alert you to all good safety and
operating practices while using the system.
Remember, you are the key to safety. Good safety practices not only protect you but also the people around you. Make
these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with
the procedures recommended and follows safety precautions. Remember, most accidents can be prevented. Do not risk
injury or death by ignoring good safety practices.
System owners must give operating instructions to operators or employees before allowing them to use the
equipment and at least annually thereafter.
The most important safety device on this equipment is a safe operator. It is the operator's responsibility to read
and understand all safety and operating instructions in the manual and to follow these. Most accidents can be
avoided.
A person must understand the operation of this equipment and be trained in it's usage before operating the
equipment. An untrained operator exposes himself and others to possible serious injury or death.
Do not modify the equipment in any way. Unauthorized modifi cation may impair the function and/or safety and
could affect the life of the equipment.
Think SAFETY! Work SAFELY!

4.1 - Warning Statement

WARNING!
Products manufactured or sold by the T.A. Pelsue Company are
intended for use by professionals trained and experienced in
the use, inspection and maintenance of these products.
Paraprofessional users such as volunteer rescue workers and
sportsmen involved in risk sports such as climbing and caving
will be held to the same standard of experience and training as
professionals.
Technical rescue, repelling, climbing and the training involved
are hazardous activities. Each situation has its own unique
conditions and must be evaluated. Effective risk management
comes from experience, proper training and good personal
judgement.
Page 10
Failure to read and heed all labels and instructions may
result in injury or death. Inspect all components before
and after each use, and remove from service if any
damage or defect is found. Keep product free from dirt
and moisture.
unattended. Do not exceed maximum rated loads.
#501071-001 - Product Manual: #DBF-43A Davit Base - Folding - Revision 00 - Date: 02-24-2009
Do not leave a suspended load

Advertisement

Table of Contents
loading

Table of Contents