Table of Contents
Advertisement
3.0 - Configuration & Assembly
Upon initial receipt of the #BC-08A system, inspect the packaging for any evidence that the product may have been
damaged in shipment. While unpacking the product, inspect all of the components for damage. If damage to any of
the components is discovered, DO NOT USE THE PRODUCT! Alert the shipping carrier immediately of the damage
to the shipment.
JAW SECURING
NUTS
ANGLE JAW
ANGLE TIGHTENING
Figure 3c: #BC-08A
Label Location
Verify that all parts are present before product use.
The #BC-08A is shipped fully assembled.
1. Ensure that the product has been shipped with all the necessary components and is in working order
(Refer to Fig. #3b)
**Refer to parts list above if replacement parts are required. Replacement parts can be ordered from the T.A. Pelsue
Company at 800-525-8460.
Page 8
Figure 3b: #BC-08A
BOLTS
2
1
#501126-001 - Product Manual: Model #BC-08A Adjustable Angle Beam Clamp - Revision 00 - Date: 12-03-2009
Parts Diagram
MANUFACTURED BY
T.A. PELSUE CO. ENGLEWOOD, COLORADO 80110
BASE MOUNTING
EARS
1) 102072-002
2) 500234-001
Advertisement
Table of Contents
