Safety Information - MINOLTA-QMS PagePro 4100W Quick Manual

Konica minolta pagepro 4100w: quick start
Hide thumbs Also See for PagePro 4100W:
Table of Contents

Advertisement

1
the machine improperly can result in a fire or an electric shock.
è
Do not place any heavy objects on the machine.
è
Do not open any covers on the machine while printing is in progress.
è
Do not switch off the unit while printing is in progress.
è
Do not place any magnetic object near the machine.
è
Do not use any flammable sprays, liquids or gases in the vicinity of the
machine.
è
Do not remove any safety devices and do not alter the construction of
the machine. The unit is equipped with high-voltage components.
Using the machine improperly can result in a fire or an electric shock.
è
Do not insert any paper clips, staples or other small metal objects into
openings on the machine. The result could be an electric shock or a
fire. If metal pieces are fed into the machine, switch it off immediately,
disconnect the power cable and contact your customer support
technical specialist.
è
Do not place coffee cups, drinks bottles or other containers with liquids
in them on the machine. If liquid enters the machine the result could
be an electric shock or a fire. If liquid does get into the machine, switch
it off immediately, disconnect the power cable and contact your
customer support technical specialist.
è
If the machine becomes unusually hot, or if you notice smoke or an
unusual odour coming from the machine, switch it off immediately and
remove the power cable from the socket. Contact your customer
support technical specialist.

Safety Information

l Laser Safety
This is a page printer which operates by means of a laser. There is no
possibility of danger from the laser, provided the printer is operated
according to the instructions in this manual.
Since radiation emitted by the laser is completely confined within
protective housing, the laser beam cannot escape from the machine
during any phase of user operation.
l Internal Laser Radiation
Maximum Radiation Power:
1.03 (mW) at laser aperture of the print head unit
Wavelength: 770-810 (nm)
This product employs Class IIIb Laser Diode. Laser Diode and
Scanning Polygon Mirror are incorporated in the print head unit.
The print head unit is not a field service item. Therefore, the print head
unit should not be opened under any circumstance.
1-4
Introduction
PagePro 4100W

Advertisement

Table of Contents
loading

Table of Contents