Table of Contents
Advertisement
Step 4
Caution
• Always use a shielded interface cable. Use of an unshielded cable can result in radio
interference with data.
Note
• You must purchase an IEEE 1284 type-B cable for connection between the printer and
a computer. For more details, refer to "Specifications" in the User's Manual (CD-ROM) .
• Minolta does not warrant the use of any particular cable. The user assumes all respon-
sibility as to the quality and performance of the cable.
1
Make sure that the printer and the computer you are connecting it to are both
turned off.
2
Connect one end of the interface cable to the parallel port of the computer.
3
Connect the other end of the interface cable to the parallel interface connector on
the back of the printer. Secure the interface cable using the two clips on the paral-
lel interface connector.
Connecting to a Computer
En-23
Advertisement
Table of Contents
