Table of Contents
Advertisement
Connect Audio Output
Follow below picture to connect audio cable and device.
1.
Press the
2.
Use audio cable to connect follow below figure.
3.
After connect and turn on both units. Your projector sound from external
device now.
4.
After using , turn off both unit
Station Amplifier
Audio cable
Install USB Device And Micro Sd Card "TF"
Follow below picture to install USB and TF card
Turn off the unit before install USB / TF card.
NOTE: In DVD mode, insert USB device and play . If resume back to play DVD after playing
USB device, please make sure to remove USB device in advance.
button to turn off power of your projector before connection.
CABLE NOT INCLUDE
13
( Aux Out / Line Out / Earphones)
Advertisement
Table of Contents
