Intermediate Position - GAPOSA XQ Sileo XS 40 Manual

INTERMEDIATE POSITION

INTERMEDIATE POSITION SETUP
(Just for motors with electronic limit switch)
Stop the shutter/awning in the
1
desired intermediate position.
Press simultaneously the UP and
DOWN buttons until the motor
makes a brief movement in both
2
directions.
The intermediate position has
been setup.
RECALLING THE INTERMEDIATE POSITION
Keep the STOP button pressed at
least for at least 3 seconds.
ERASING THE INTERMEDIATE POSITION
Press simultaneously, both the UP
and DOWN buttons until the motor
makes a brief movement in both
directions.
3"
GAPOSA srl - via Ete, 90
63900 Fermo - Italy
T. +39.0734.220701 - info@gaposa.com