Starting The Cleaner - Polaris NEO EM27 Owner's Manual

cleaner
Max Floating Cable Length
Figure 5. Set Up for Optimal Patterning
4.3

Starting the Cleaner

The fi rst time you use the cleaner, the cleaning surface
setting is Floor and Walls
After the fi rst time, the default is the last setting used. .
Select Cleaning Surface:
• Use to change cleaning surface
setting.
cleaner
Recommended
entry point
Begin Cleaning:
•
.
•
NOTE: Periodically the cleaner will pause for up to 20
Not
Recommended
After selecting the cleaning surface,
press to begin operation.
At the beginning of the cycle, the cleaner remains
in place for a few seconds to initialize the
microcontroller after the pump starts.
seconds throughout the cleaning cycle. The cleaner
is calibrating its position in the pool during this
process. This is normal operation and the cleaner will
resume movement immediately after calibration with
no user action required. The pause does not affect
the overall cleaning cycle.
Page 7